Technical data - Radiators

Technical data ROMANTIK ROMANTIK PLUSZ LUX
Full height 280 380 530 630 680 930 280 380 530 630 680 930 1630 1830 2030
Clerance of red. fittings
[Kcs](mm)
250 350 500 600 650 900 250 350 500 600 650 900 1600 1800 2000
Weight (kg/cell) 0.71 0.89 1.17 1.32 1.43 1.92 0.64 0.81 1.07 1.22 1.33 1.69 3.05 3.61 3.73
Heating surface
(m2/cell)
0.21 0.29 0.43 0.52 0.57 0.79 0.14 0.22 0.32 0.37 0.43 0.62 1.25 1.40 1.55
Water-flow/cell
(l/h/cell)
4 5 10 11 12 15 4 5 10 11 12 15 -
Volume
(l/cell)
0.11 0,13 0.15 0.16 0.17 0.21 0.12 0.13 0.16 0.17 0.18 0.22 0.33 0.36 0.39
Heat-output per cell
(W/cell) at 50°C
56.5 74.5 104 119 128.5 164 56.5 74.5 104 119 128.5 164 261 276 295
Heat-output per cell
(W/cell) at 60°C
71 94 131 152 164 207 71 94 131 152 164 207 333 352 376
"n" exponent 1.25 1.26 1.26 1.28 1.31 1.28 1.29 1.31 1.33 1.33 1.34 1.35 1.31 1.31 1.31
Distribution license number Valid until 31. January, 2011 - É.M.I. A-7/2001
Nominal pressure 6 bar
Testing pressure 9 bar
Operating temperature max 110°C max 110°C max 110°C
Heating water drinking water quality (PH7,0-8,5)
Junction for 1/2" piping use Rp 3/4"-1/2" reduction fittings
Cell width 90+3 mm 90+3 mm 90+3 mm
Number of cells 2..32 2..32 2..8
Range of colors
(standard)
 
Eloxed finish nature: Y2M34 I, Old-Silver: Y2M26 I, mahogany: Y2M30 I nature: Y2M34 I, Old-Silver: Y2M26 I, mahogany: Y2M30 I nature: Y2M34 I, Old-Silver: Y2M26 I, mahogany: Y2M30 I
Powder coated finish White, Brown, Cream White, Brown, Cream White, Brown, Cream
RAL-colors 1000, 8015, 1015 1000, 8015, 1015 1000, 8015, 1015
We accept special orders for any customized color of your choice in a powder coated finish.

 

Measuring/installation

It is important to note that when installing the radiator and connecting it to the pipe system that only the components, fittings and accessories provided with the unit are used. Please see below the data table for installation and measurement instructions.

Intermediary
connection
fitting distance
 

A
250 180
350 280
500 430
600 530
650 580
900 830
1600 1530
1800 1730
2000 1930

Technical data - Radiators

Number of cells 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16  
Long (L) 183 276 369 462 555 648 741 834 927 1020 1113 1206 1299 1392 1485  
Supporting length (B) - 93 186 279 372 465 558 651 744 837 930 1023 1116 1209 1302  
                                 
Number of cells 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
Long (L) 1578 1671 1764 1857 1950 2043 2136 2229 2322 2415 2508 2601 2694 2787 2880 2973
Supporting length (B) 1395 1488 1581 1674 1767 1860 1953 2046 2139 2232 2325 2418 2511 2604 2697 2790

 

Installation order


  1. Remove wrapping foil

  2. Remove corner pieces

  3. Install the components to the top part of the radiator as shown in figure 3

  4. Drill the holes necessary for the supporting brackets (see figure 4)

  5. Screw in the brackets

  6. Put the forks in the brackets

  7. Mount the spacing screw on the back of the radiator

  8. Place the radiator in its correct position and adjust the fork in order to set the horizontal level. Set the vertical level by adjusting the spacing screw on the back of the radiator
 

Album